Allen & Heath ME 1 Personal Monitor Mixer

Allen & Heath ME 1 Personal Monitor Mixer

  • 40 Sources from Qu/SQ/GLD/iLive & dLive Mixers
  • Works With ME-U Hub to Other Mixers
  • Compatible with MADI, Dante, EtherSound
  • 16 Assignable Keys
  • Supports Daisy Chaining
Image
  • Order within
Available: In Stock
R 7,995.00
Successful Pre-order.Thanks for contacting us!

The Allen & Heath ME 1 Personal Monitor Mixer is designed to give individual musicians, performers, and presenters the freedom to control their own tailored monitor mixes for use on stage or in houses of worship, rehearsal rooms, studios, conferences, or live events.

This standalone digital personal mixer receives input from up to 40 sources via a single CAT5 cable (sold separately) from the main console (sold separately) and mixes these to a stereo and mono output to drive headphones, in-ear monitors, loudspeakers, or other monitoring devices over 3.5mm or 1/4" outputs. The mixer features a simple user interface with intuitive, clear visual feedback, and custom naming system.

This mixer is the cornerstone of the ME Personal Mixing System (sold separately) and is ready to use with the Allen & Heath iLive and GLD series Digital Mixers. It is complemented by the ME-U Hub (sold separately), which opens up the benefits of ME to users of other professional digital mixers via the Dante AVB-Ready Audio Networking Solution, EtherSound Audio Network Card, or MADI Audio Plug-In Card (all sold separately).

It also has an Aviom compatibility mode for use with Aviom Pro16 systems. You can eliminate the need to use up main console buses by grouping the 40 channels within the mixer to simplify control for each musician. You can assign as few or as many of the 16 keys as needed to control the mix.

The Allen & Heath ME 1 Personal Monitor Mixer is designed to give individual musicians, performers, and presenters the freedom to control their own tailored monitor mixes for use on stage or in houses of worship, rehearsal rooms, studios, conferences, or live events.

This standalone digital personal mixer receives input from up to 40 sources via a single CAT5 cable (sold separately) from the main console (sold separately) and mixes these to a stereo and mono output to drive headphones, in-ear monitors, loudspeakers, or other monitoring devices over 3.5mm or 1/4" outputs. The mixer features a simple user interface with intuitive, clear visual feedback, and custom naming system.

This mixer is the cornerstone of the ME Personal Mixing System (sold separately) and is ready to use with the Allen & Heath iLive and GLD series Digital Mixers. It is complemented by the ME-U Hub (sold separately), which opens up the benefits of ME to users of other professional digital mixers via the Dante AVB-Ready Audio Networking Solution, EtherSound Audio Network Card, or MADI Audio Plug-In Card (all sold separately).

It also has an Aviom compatibility mode for use with Aviom Pro16 systems. You can eliminate the need to use up main console buses by grouping the 40 channels within the mixer to simplify control for each musician. You can assign as few or as many of the 16 keys as needed to control the mix.

Inputs 40 Inputs (CAT5), Stereo Aux, ambient mic
Outputs 2 x stereo (Line or Headphones), mono line out
Control Input: Level, Mute, Pan, Solo, Trim All
Master: Level, Mute, 3-band EQ, Limiter
Group: Level, Mute, Level/Pan for sources within a Group
Groups 16; up to 40 sources assignable
Presets 16; Store input levels, Mutes, Pans, Key assign, Names, Group sources
Configuration Stores setup and all presets
Name Channels, Keys, Unit, Presets, Configuration
Data Port USB: Individual presets or config transfer, firmware update
CAT5 Audio and PoE: Link In and Link Out, locking etherCON connectors
Stereo Output Stereo 1/4" and 3.5 mm jacks
Headphones: 300 mW + 300 mW into 100 Ω load
< Maximum +21 dBu
Mono Output Balanced TRS jack
Nominal 0 dBu, maximum +18 dBu
AUX Input Stereo 3.5 mm jack
Nominal -8 dBu, Maximum +10 dBu
Input Impedance >10 kΩ
AD/DA Conversion 24-bit Delta/Sigma, 48 kHz
Residual Output Noise 48 kHz -95 dBu (Level down, 20 to 20 kHz)
Frequency Response +0/-1 dB, 10 Hz to 20 kHz
Power Mains: 100 to 240 VAC, 50 / 60 Hz In, 12 VDC 1.25 A Out
Power over CAT5 Cable (PoE): 10 W (Requires 13 W from PoE hub)
Dimensions (W x D x H) 8.9 x 5.9 x 2.2" (225 x 150 x 55 mm)
Weight 2.0 lb (900 g) including phones hook

Shipment processing time

  • All orders are processed within 2-3 business days.
  • Real-time order tracking information will be sent via SMS and EMAIL once your order has been successfully processed and captured.
  • Standard/Free shipping does not include delivery on weekends or holidays.
  • Deliveries on weekend and holidays can be arranged at an extra charge to customer.

If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email or telephone. We appreciate your patience!

Shipping rates & delivery estimates

Orders below R850 does not qualify for free shipping.

Please factor in a nominal nationwide economy road 2-3 Day ETA charge of R150.

Shipment method

Estimated delivery time

Shipment cost

Economy Road

2-3 business days

Free / R850 and above

Everyday shipping as per Economy Road freight, we work with a few different courier companies and special services are available. Please request any service which’ll be the most convenient for you and Technical Sales will gladly investigate it and revert for your consideration.

* Overnight delivery is only available for orders with delivery addresses within South Africa and confirmed before 10AM the given morning.

Delivery delays can occasionally occur, your Technical Sales Rep will keep you up to date.