Adam Audio T5V T-Series Active Nearfield Monitor - PAIR

Adam Audio T5V T-Series Active Nearfield Monitor - PAIR

  • 5" Polypropylene Woofer
  • U-ART 1.9" Accelerated Ribbon Tweeter
  • Total Output: 70W
  • Frequency Response: 45 Hz to 25 kHz
  • Maximum SPL: 106 dB
  • Order within
Available: In Stock
R 9,990.00
Successful Pre-order. Thanks for contacting us!

    The Adam Audio T5V is an affordable, high-quality, near-field, active studio monitor well suited for project studios, commercial recording facilities, and broadcast environments.

    The speaker features Adam's U-Art 1.9" accelerated ribbon tweeter with HPS waveguide and a 5" polypropylene woofer with a rear-firing bass-reflex port. The unit is bi-amped with 50W allocated to the woofer, while 20W powers the tweeter, which combine to provide a frequency response of 45 Hz to 25 kHz and a maximum SPL of 106 dB. The rear panel offers XLR and RCA connections with controls for input sensitivity, gain, high-shelf (-2, 0, +2 dB), and low-shelf (-2, 0, +2 dB). The Adam Audio T5V ships with a power cord.

    U-ART 1.9" Accelerated Ribbon Tweeter

    • Allows longer operation with fewer signs of fatigue
    • Breakup is prevented by the folded diaphragms, distortions are effectively reduced to a minimum
    • Advanced dynamic range due to acoustically effective diaphragm surface that is 2.5 times bigger (compared to a classic tweeter according to the piston principle)

    Air velocity ratio of 4:1 during the sound generation by folded U-ART membrane

    Direct, fast response in the high-range even with complex transients

    HPS waveguide from the S Series

    Makes dispersion more consistent and imaging more stable over a wider area
    Reduction of early reflections on the surfaces of mixing consoles, desks, and more

    Lightweight polypropylene construction of the woofer

    Excellent transient response even at high sound levels without breakup of the diaphragm

    Vertical 2-way system with 5" woofer

    High resolution of the stereo image

    Rear-firing bass reflex port

    Bass reproduction with very low compression

    Linear frequency response of 45 Hz to 25 kHz

    Unbiased reproduction in a wide frequency band

    Maximum peak sound pressure per pair in 3.3' (1 m) 106 dB

    Powerful, compression-free sound reproduction even at very high sound levels

    DSP-powered crossover design

    Smooth frequency response without interference between the drivers in the critical midrange

    Simple room acoustic adjustments via high- and low-shelf filters

    Allows optimal adaptation to acoustically difficult listening environments or individual preferences

    Analog inputs over XLR and RCA

    Optimized for balanced and unbalanced line signals

    Acoustically optimized cabinet geometry

    Reduction of unwanted reflections on the cabinets

      The Adam Audio T5V is an affordable, high-quality, near-field, active studio monitor well suited for project studios, commercial recording facilities, and broadcast environments.

      The speaker features Adam's U-Art 1.9" accelerated ribbon tweeter with HPS waveguide and a 5" polypropylene woofer with a rear-firing bass-reflex port. The unit is bi-amped with 50W allocated to the woofer, while 20W powers the tweeter, which combine to provide a frequency response of 45 Hz to 25 kHz and a maximum SPL of 106 dB. The rear panel offers XLR and RCA connections with controls for input sensitivity, gain, high-shelf (-2, 0, +2 dB), and low-shelf (-2, 0, +2 dB). The Adam Audio T5V ships with a power cord.

      U-ART 1.9" Accelerated Ribbon Tweeter

      • Allows longer operation with fewer signs of fatigue
      • Breakup is prevented by the folded diaphragms, distortions are effectively reduced to a minimum
      • Advanced dynamic range due to acoustically effective diaphragm surface that is 2.5 times bigger (compared to a classic tweeter according to the piston principle)

      Air velocity ratio of 4:1 during the sound generation by folded U-ART membrane

      Direct, fast response in the high-range even with complex transients

      HPS waveguide from the S Series

      Makes dispersion more consistent and imaging more stable over a wider area
      Reduction of early reflections on the surfaces of mixing consoles, desks, and more

      Lightweight polypropylene construction of the woofer

      Excellent transient response even at high sound levels without breakup of the diaphragm

      Vertical 2-way system with 5" woofer

      High resolution of the stereo image

      Rear-firing bass reflex port

      Bass reproduction with very low compression

      Linear frequency response of 45 Hz to 25 kHz

      Unbiased reproduction in a wide frequency band

      Maximum peak sound pressure per pair in 3.3' (1 m) 106 dB

      Powerful, compression-free sound reproduction even at very high sound levels

      DSP-powered crossover design

      Smooth frequency response without interference between the drivers in the critical midrange

      Simple room acoustic adjustments via high- and low-shelf filters

      Allows optimal adaptation to acoustically difficult listening environments or individual preferences

      Analog inputs over XLR and RCA

      Optimized for balanced and unbalanced line signals

      Acoustically optimized cabinet geometry

      Reduction of unwanted reflections on the cabinets

      Woofer Number: 1
      Basket Ø: 5.0" / 127.0 mm
      Cone Material: Polypropylene
      Tweeter Number: 1
      Type: U-ART
      Diaphragm Area: 4.0" / 101.6 mm        
      Equiv. Diaphragm Ø: 1.9" / 48.3 mm
      Velocity Transform Ratio: 4:1
      Diaphragm Weight: 0.006 oz / 0.17 g
      Waveguide: HPS
      Amplifier Number: 2
      Woofer: 1
      Type: PWM (Class-D)
      Amplifier Power RMS: 50 W
      Tweeter: 1
      Type: PWM (Class-D)
      Amplifier Power RMS: 20 W
      Control Options Input Sensitivity: Switchable +4 dBu / -10 dBV
      Gain: Yes
      High-Shelf: -2, 0, +2 dB
      Low-Shelf: -2, 0, +2 dB
      Input Connectors Analog: XLR, RCA
      Input Impedance: 10 kOhm / 20 kOhm
      Frequency Response 45 Hz to 25 kHz
      THD THD > 80 Hz: 0.5 %
      Maximum SPL Maximum SPL: ≥106 dB (per pair at 3.3 / 1.0 m)
      Crossover 3 kHz
      Power AC Mains Inputs Voltage: 100 to 240 VAC 50/60 Hz
      Maximum Power Consumption 132 W
      Dimensions (H x W x D) 11.7 x 7.0 x 11.7" / 297.2 x 177.8 x 297.2 mm
      Weight 12.6 lb / 5.7 kg

      Shipment processing time

      • All orders are processed within 2-3 business days.
      • Real-time order tracking information will be sent via SMS and EMAIL once your order has been successfully processed and captured.
      • Standard/Free shipping does not include delivery on weekends or holidays.
      • Deliveries on weekend and holidays can be arranged at an extra charge to customer.

      If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email or telephone. We appreciate your patience!

      Shipping rates & delivery estimates

      Orders below R850 does not qualify for free shipping.

      Please factor in a nominal nationwide economy road 2-3 Day ETA charge of R150.

      Shipment method

      Estimated delivery time

      Shipment cost

      Economy Road

      2-3 business days

      Free / R850 and above

      Everyday shipping as per Economy Road freight, we work with a few different courier companies and special services are available. Please request any service which’ll be the most convenient for you and Technical Sales will gladly investigate it and revert for your consideration.

      * Overnight delivery is only available for orders with delivery addresses within South Africa and confirmed before 10AM the given morning.

      Delivery delays can occasionally occur, your Technical Sales Rep will keep you up to date.