The Allen and Heath ME 1 Personal Monitor Mixer is designed to give individual musicians, performers, and presenters the freedom to control their own tailored monitor mixes for use on stage or in houses of worship, rehearsal rooms, studios, conferences, or live events.
This standalone digital personal mixer receives input from up to 40 sources via a single CAT5 cable (sold separately) from the main console (sold separately) and mixes these to a stereo and mono output to drive headphones, in-ear monitors, loudspeakers, or other monitoring devices over 3.5mm or 1/4" outputs. The mixer features a simple user interface with intuitive, clear visual feedback, and custom naming system.
This mixer is the cornerstone of the ME Personal Mixing System (sold separately) and is ready to use with the Allen & Heath iLive and GLD series Digital Mixers. It is complemented by the ME-U Hub (sold separately), which opens up the benefits of ME to users of other professional digital mixers via the Dante AVB-Ready Audio Networking Solution, EtherSound Audio Network Card, or MADI Audio Plug-In Card (all sold separately).
It also has an Aviom compatibility mode for use with Aviom Pro16 systems. You can eliminate the need to use up main console buses by grouping the 40 channels within the mixer to simplify control for each musician. You can assign as few or as many of the 16 keys as needed to control the mix.
|Inputs||40 Inputs (CAT5), Stereo Aux, ambient mic|
|Outputs||2 x stereo (Line or Headphones), mono line out|
|Control||Input: Level, Mute, Pan, Solo, Trim All
Master: Level, Mute, 3-band EQ, Limiter
Group: Level, Mute, Level/Pan for sources within a Group
|Groups||16; up to 40 sources assignable|
|Presets||16; Store input levels, Mutes, Pans, Key assign, Names, Group sources|
|Configuration||Stores setup and all presets|
|Name||Channels, Keys, Unit, Presets, Configuration|
|Data Port||USB: Individual presets or config transfer, firmware update|
|CAT5||Audio and PoE: Link In and Link Out, locking etherCON connectors|
|Stereo Output||Stereo 1/4" and 3.5 mm jacks
Headphones: 300 mW + 300 mW into 100 Ω load
< Maximum +21 dBu
|Mono Output||Balanced TRS jack
Nominal 0 dBu, maximum +18 dBu
|AUX Input||Stereo 3.5 mm jack
Nominal -8 dBu, Maximum +10 dBu
Input Impedance >10 kΩ
|AD/DA Conversion||24-bit Delta/Sigma, 48 kHz|
|Residual Output Noise||48 kHz -95 dBu (Level down, 20 to 20 kHz)|
|Frequency Response||+0/-1 dB, 10 Hz to 20 kHz|
|Power||Mains: 100 to 240 VAC, 50 / 60 Hz In, 12 VDC 1.25 A Out
Power over CAT5 Cable (PoE): 10 W (Requires 13 W from PoE hub)
|Dimensions (W x D x H)||8.9 x 5.9 x 2.2" (225 x 150 x 55 mm)|
|Weight||2.0 lb (900 g) including phones hook|
|Package Weight||4.7 lb|
|Box Dimensions (LxWxH)||13.2 x 11.3 x 6.3"|