Midas DM12 12-Input Analog Mixing Desk

Midas DM12 12-Input Analog Mixing Desk

  • Order within
Available: Out of Stock
R 4,995.00
Successful Pre-order. Thanks for contacting us!

Designed to be used in live and recording situations, the MIDAS DM12 is a 12-input analog mixing desk.

Each one of its eight mono inputs features a 48V phantom power-enabled MIDAS microphone preamp, as well as a 1/4" line input. These mono channels also sport a three-band EQ with a sweepable middle frequency for fine-tuning timbres. Also useful are 1/4" inserts across each mono input for use with external processing, should you wish to utilize outboard gear. 

Two auxiliary channels are switchable between pre- and post-fader. You can use these auxiliary channels for making headphone/cue mixes, though you also have the option to use any channel on the board as returns for the two auxiliary outputs, allowing you to loop in external effects processors for things like reverb, delay, and whatever else you might want to throw across a bus.

A dedicated 1/4" headphone output is suitable for engineers to achieve a more up-close and focused picture of what's being outputted through the mixer. Additionally, an RCA I/O section allows you to play 2-track audio from a separate device, or to route signal to an external recorder, and thus, to create board recordings without using up necessary mixer real estate.

Features:

  • 3-band EQ on mono channels with sweepable mid band
  • 2 aux sends with pre/post fader switching, can be used for external effects processing, custom monitor mixes, or both
  • 12 Precision Faders with 60mm Throw
  • 2 electronically balanced stereo line-input channels on 1/4" TRS connectors
  • Live performance and studio recording analogue mixer with 12-input channels
  • Suitable for small venues, or keyboard/drum sub-mixer for larger-scale performances
  • 8 mono input channels with MIDAS microphone preamplifiers
  • 9/10 and 11/12 are dedicated stereo channels, making them suitable for stereo instruments such as keyboards, and can also be used for mono signals thanks to a convenient balance control on each 2-channel grouping
  • Input channels can also be used as return inputs for signals sent to external effects-processing equipment

 

Designed to be used in live and recording situations, the MIDAS DM12 is a 12-input analog mixing desk.

Each one of its eight mono inputs features a 48V phantom power-enabled MIDAS microphone preamp, as well as a 1/4" line input. These mono channels also sport a three-band EQ with a sweepable middle frequency for fine-tuning timbres. Also useful are 1/4" inserts across each mono input for use with external processing, should you wish to utilize outboard gear. 

Two auxiliary channels are switchable between pre- and post-fader. You can use these auxiliary channels for making headphone/cue mixes, though you also have the option to use any channel on the board as returns for the two auxiliary outputs, allowing you to loop in external effects processors for things like reverb, delay, and whatever else you might want to throw across a bus.

A dedicated 1/4" headphone output is suitable for engineers to achieve a more up-close and focused picture of what's being outputted through the mixer. Additionally, an RCA I/O section allows you to play 2-track audio from a separate device, or to route signal to an external recorder, and thus, to create board recordings without using up necessary mixer real estate.

Features:

  • 3-band EQ on mono channels with sweepable mid band
  • 2 aux sends with pre/post fader switching, can be used for external effects processing, custom monitor mixes, or both
  • 12 Precision Faders with 60mm Throw
  • 2 electronically balanced stereo line-input channels on 1/4" TRS connectors
  • Live performance and studio recording analogue mixer with 12-input channels
  • Suitable for small venues, or keyboard/drum sub-mixer for larger-scale performances
  • 8 mono input channels with MIDAS microphone preamplifiers
  • 9/10 and 11/12 are dedicated stereo channels, making them suitable for stereo instruments such as keyboards, and can also be used for mono signals thanks to a convenient balance control on each 2-channel grouping
  • Input channels can also be used as return inputs for signals sent to external effects-processing equipment

 

Input Channels Mic inputs (MIDAS mic preamp): 8
Type: XLR, balanced
Mic EIN @ 60 dB Gain, 50 Ohms Source at Insert Send: -131 dBu, unweighted, 20 Hz to 20 kHz
Mic EIN @ 60 dB Gain, 150 Ohms Source at Insert Send: -128 dBu, unweighted, 20 Hz to 20 kHz
Noise @ 10 dB Gain, at Insert Send: -97 dBu, unweighted, 20 Hz to 20 kHz
Frequency Response (-1 dB) at Main Output: 20 Hz to 20 kHz (-1 dB)
Frequency Response (-3 dB) at Main Output: 70 kHz (-3 dB)
Mic Gain Range: +10 to +60 dB
Maximum Input Level: +11 dBu @ +10 dB gain
CMRR @ +60 dB Gain: Typically -90 dB
Impedance: 2 kOhms, Balanced
Distortion (THD+N) at 0 dBu: 0.005% @ 1 kHz
Phantom Power: Switchable, +48 V
Line Input Type: 1/4" TRS, balanced
Impedance: 20 kOhms balanced / unbalanced
Line Gain Range: -10 to +40 dB
Maximum Input Level: +30 dBu
Stereo Input Type 4 x 1/4" TRS connector, balanced
Impedance: 20 kOhms balanced / unbalanced
Gain Range: -20 to +20 dB
Maximum Input Level: +21 dBu
Equalizer Low: ±15 dB @ 80 Hz, shelving
Mid (mono inputs only) ±15 dB @ 150 Hz to 3.5 kHz, variable semi-parametric
High ±15 dB @ 12 kHz, shelving
Channel Inserts Type: 1/4" TRS connector, unbalanced
Maximum Input / Output Level: +21 dBu
AUX Sends Type: 2 x 1/4" TRS connector, balanced
Impedance: 240 Ohms balanced, 120 Ohms unbalanced
Maximum Output Level: +21 dBu
Monitor Output Type: 2 x 1/4" TRS connector, balanced
Impedance: 240 Ohms balanced, 120 Ohms unbalanced
Maximum Output Level: +21 dBu
Main Output Type: 2 x XLR, electronically balanced
Impedance: 100 Ohms balanced, 50 Ohms unbalanced
Maximum Output Level: +21 dBu
Inserts Main Out Inserts:
Type: 2 x 1/4" TRS connector, unbalanced
Maximum Input/Output Level +21 dBu
Phones/Line Out Type 1/4" TRS connector, unbalanced
Impedance: 25 Ohms
Maximum Output Level: +21 dBu
Track Format Type: 2 x RCA, unbalanced
Impedance: 20 kOhms
Maximum Input Level: +21 dBu
Record Output Type: 2 x RCA, unbalanced
Impedance: 1 kOhm
Maximum Output Level: +21 dBu
Main Mix Main Mix @ -∞, Channel Fader @ -∞: -104 dBu, unweighted, 20 Hz to 20 kHz
Main Mix @ 0 dB, Channel Fader @ -∞: -91 dBu, unweighted, 20 Hz to 20 kHz
Main Mix @ 0 dB, Channel Fader @ 0 dB: -84 dBu, unweighted, 20 Hz to 20 kHz
Power Supply Switch Mode Power Supply: 100 to 240V to 50/60 Hz, switchable (T 1.6 A H 250 V) Power Consumption: 40 W Mains Connection Standard IEC receptacle
Dimensions (H x W x D) 3.7 x 13 x 15" / 9.5 x 33 x 37 cm
Packaging Info
Package Weight 11.15 lb
Box Dimensions (LxWxH) 17.3 x 15.9 x 5.9"

Shipment processing time

  • All orders are processed within 2-3 business days.
  • Real-time order tracking information will be sent via SMS and EMAIL once your order has been successfully processed and captured.
  • Standard/Free shipping does not include delivery on weekends or holidays.
  • Deliveries on weekend and holidays can be arranged at an extra charge to customer.

If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email or telephone. We appreciate your patience!

Shipping rates & delivery estimates

Orders below R850 does not qualify for free shipping.

Please factor in a nominal nationwide economy road 2-3 Day ETA charge of R150.

Shipment method

Estimated delivery time

Shipment cost

Economy Road

2-3 business days

Free / R850 and above

Everyday shipping as per Economy Road freight, we work with a few different courier companies and special services are available. Please request any service which’ll be the most convenient for you and Technical Sales will gladly investigate it and revert for your consideration.

* Overnight delivery is only available for orders with delivery addresses within South Africa and confirmed before 10AM the given morning.

Delivery delays can occasionally occur, your Technical Sales Rep will keep you up to date.