Onkyo A 9010 Integrated Stereo Amplifier

Onkyo A 9010 Integrated Stereo Amplifier

  • Order within
Available: In Stock
R 6,990.00
Successful Pre-order. Thanks for contacting us!

Enjoy high-resolution stereo sound with the Onkyo A 9010 Integrated Stereo Amplifier.

It delivers up to 44W per channel at 8 Ohms and has an optical input, a digital coaxial input, a phono input, and four stereo RCA inputs. The A-9010 features an integrated DAC and a front-panel 1/4" headphone jack.

More Digital and Analog Connections

The A-9010 features 192 kHz/24-bit-capable coaxial and 96 kHz/24-bit optical inputs to accept Hi-Res, lossless, or compressed audio signals from source devices including computers and media streamers. Digital inputs let you explore the world of computer audio, send the sound from your TV to the amp and speaker system, or allow the A-9010's Wolfson D/A conversion stage to take over when playing compact discs.

Separate Headphone Amplification Circuitry

The A-9010 includes an independent headphone amplifier powerful enough to drive your high-impedance headphones. Thanks to the digital inputs and Wolfson DAC, you can plug in your computer and enjoy stadium-sized sound without bothering anyone.

Enjoy Pure Analog Playback of Vinyl Records

The A-9010 features a built-in MM phono equalizer, allowing you to connect a turntable and enjoy your record collection with dynamic and engaging analog sound. When an incoming analog signal is detected, the receiver automatically shuts down the digital circuitry to prevent interference so you can enjoy clear and detailed sound.

Authentic High-Fidelity Amplification System

Wide Range Amplifier Technology (WRAT) uses a high current to maintain control of the speaker drivers for accurate audio reproduction, from the most delicate piano passages to an orchestra in full flight. To achieve this, the A-9010 features an EI transformer and audio-grade capacitors with an extruded aluminum heat sink to keep the amps cool. The amplifier circuits have discrete low-impedance output stages with heavy-duty transistors for instantaneous power and low distortion, while closed ground-loop circuits help to minimize noise. Together, these technologies deliver detailed sound whether you're listening to compressed digital music or a vinyl record.

Wolfson Digital-to-Analog Converter

The Wolfson WM8718 is capable of decoding PCM signals to 192 kHz and 24-bit resolution.

Quality Construction Equals Better Performance

The A-9010's chassis is designed to isolate the audio signal from vibrations that cause interference during the amplification process. Another highlight is the gold-plated and banana-plug-compatible speaker posts with transparent screw-type knobs. The speaker terminals are connected to the amp circuitry inside the receiver via thick speaker plates rather than speaker relays to preserve signal integrity.

Control Your System with One Remote

Remote Interactive (RI) terminals let you operate other compatible audio components (such as a CD player or tuner) in your system using a single remote control. RI capability also adds functionality when Onkyo's DS-A5 RI Dock for iPod is connected to another component, including System On/Off, Auto Power On, and Auto Selector


  • Wolfson WM8718 192 kHz/24-bit digital-to-analog converter
  • Coaxial supports sampling rates up to 192 kHz/24-bit (optical 96 kHz/24-bit)
  • Independent headphone amplification circuitry
  • High-current, low-impedance drive
  • Four audio-grade capacitors
  • Extruded aluminum heat sink
  • Integrated speaker plates maintain signal quality
  • Gold-plated, screw-type, banana-plug-compatible speaker posts
  • Automatic digital circuitry shutdown function for pure analog sound
  • Tone controls (Bass/Treble/Balance)
Number of Channels 2
Power Rating 44 W per channel @ 8 Ohms, 1 kHz, 0.08% THD, 2-channels driven, FTC
Speaker Impedance 4 to 16 Ohms
Frequency Response 10 Hz to 100 kHz, +1, -3 dB (Line 1)
Signal to Noise Ratio Line-In, IHF-A: 92 dB
Phono MM-In, IHF-A: 78 dB
Total Harmonic Distortion (THD) 0.08% @ 1 kHz, 1 W output
Damping Factor 95 (1 kHz, 8 Ohms)
Tone Control Bass: ±10 dB, 100 Hz
Treble: ±10 dB, 10 kHz
Input 4 x Stereo RCA L/R
1 x Phono stereo RCA L/R
1 x Optical TOSLINK
1 x Digital coaxial
1 x 1/8" (3.5 mm) line (front)
Output 1 x Stereo RCA L/R
1 x 1/4" (6.35 mm) headphone (front)
Speaker Connectors 2 x Gold-plated binding post pairs
Other Connectors 1 x Remote Interactive out
Input Sensitivity/Impedance Line: 150 mV / 100 kOhms
Phono MM: 3.0 mV / 47 kOhms
Output Level and Impedance Line Out: 0.15 V / 2.2 kOhms
Phono Overload: 94 mV (MM, 1 kHz, 0.5%)
Power Requirements 120 VAC, 60 Hz
Power Consumption Operational: 140 W
No Sound: 20 W
Standby: 0.3
Dimensions (W x H x D) 17 x 5 x 13" (435 x 129.5 x 332.5 mm)
Weight 14.3 lb (6.5 kg)

Shipment processing time

  • All orders are processed within 2-3 business days.
  • Real-time order tracking information will be sent via SMS and EMAIL once your order has been successfully processed and captured.
  • Standard/Free shipping does not include delivery on weekends or holidays.
  • Deliveries on weekend and holidays can be arranged at an extra charge to customer.

If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email or telephone. We appreciate your patience!

Shipping rates & delivery estimates

Orders below R850 does not qualify for free shipping.

Please factor in a nominal nationwide economy road 2-3 Day ETA charge of R150.

Shipment method

Estimated delivery time

Shipment cost

Economy Road

2-3 business days

Free / R850 and above

Everyday shipping as per Economy Road freight, we work with a few different courier companies and special services are available. Please request any service which’ll be the most convenient for you and Technical Sales will gladly investigate it and revert for your consideration.

* Overnight delivery is only available for orders with delivery addresses within South Africa and confirmed before 10AM the given morning.

Delivery delays can occasionally occur, your Technical Sales Rep will keep you up to date.