Onkyo A 9150 2-Channel 120W Integrated Stereo Amplifier

Onkyo A 9150 2-Channel 120W Integrated Stereo Amplifier

  • Order within
Available: In Stock
R 14,990.00
Successful Pre-order. Thanks for contacting us!

Enjoy high-resolution stereo sound with the Onkyo A 9150 2-Channel 120W Home Theater Power Amplifier.

It delivers up to 60W per channel at 4 Ohms and has two optical inputs, two digital coaxial inputs, a dedicated phono input, and five stereo RCA inputs. The A-9150 features an integrated DAC and a front-panel 1/4" headphone jack.

Designed for Enhanced Power Amplification

In order to deliver a clear and comfortable audio image, sounds of different frequencies should arrive at the listening position simultaneously. The power amplification circuits in the A-9150 feature topology that's designed for phase accuracy, wide-spectrum signal reproduction, and natural transient response.
 

Enhanced Musicality with Discrete SpectraModule

The discrete SpectraModule features a slew rate of over 500 V/μs to help produce accurate definition of instruments ranged around a larger and more realistic soundstage.
 

Dedicated MM/MC Phono Circuit Board

The A-9150 features a gold-plated phono input that supports signals from either MM or MC cartridges fitted to your choice of turntable. Its separate phono circuit board has dedicated equalizers served by a customized head amp, which operates in discrete configuration for MC signals. Together with analog power amplification, this phono input design helps express the depth and vitality of music on vinyl.
 

High-Current Transformer and Capacitors

Current influences sound quality; high current is required for a better grip on the speaker transducers, improving control and accuracy. A high-output transformer and two capacitors inside the A-9150 deliver current through discrete output-stage transistors that are kept cool by an aluminum heat sink. This allows the speakers to react nearly instantly, with throw-range controlled for accurate articulation, even through dynamic and complex musical passages.
 

DIDRC Filter and 768 kHz / 32-Bit DAC for Natural Sound

Distortion in the ultra-high-frequency spectrum can have a noticeable impact on the character of audible sound. The DIDRC Filter is designed to completely erase ultra-high-frequency noise. Performance is optimized for digital music with an undistorted frequency response extending above the range of audibility. Combined with a 768 kHz / 32-bit DAC, you can enjoy an enhanced sense of realism from digital sources, with none of the unnatural "synthesized" feeling sometimes produced by digital processing.
 

Designed for Enhanced Quality with Reduced Resonance

Held in place by a flat chassis designed to tame resonance, the digital audio board is isolated from the analog circuitry. The L/R channels are symmetrical to equalize signal path-lengths and minimize stereo playback errors. The coaxial digital inputs, phono input, speaker posts, and RCA line inputs are gold-plated to prevent corrosion and improve connectivity. The A-9150 is finished off with an aluminum front panel and volume control.
 

Features:

  • High-current, low-impedance drive
  • 192 kHz / 24-bit HD audio playback via digital coaxial input
  • Bass, treble, balance control
  • AKM AK4452 768 kHz / 32-bit digital-to-analog converter
Amplifier
Power Output 60 W per channel @ 4 Ohms, 20 Hz to 20 kHz, 0.08% THD, 2 channels driven, FTC
THD & Noise 0.08% (20 Hz to 20 kHz, rated power)
Inputs 2 x optical TOSLINK
2 x digital coaxial
5 x stereo RCA
1 x stereo RCA phono with ground screw
Outputs 1 x stereo RCA line out
1 x stereo RCA pre-out
1 x 1/4" (6.35 mm) headphone (front)
Other Connectors 1 x 1/8" (3.5 mm) RI remote
Speaker Connectors 4 x binding post pairs (A + B)
Input Sensitivity and Impedance Line: 220 mV / 220 kOhms
Phono MM: 4 mV / 47 kOhms
Phono MC: 0.4 mV / 120 Ohms
Output Level and Impedance RC: 0.2 V / 2.3 kOhms (Line Out)
Phono Overload (MM): 70 mV / 1 kHz, 0.5%
Phono Overload (MC): 7 mV / 1 kHz, 0.5%
Frequency Response 10 Hz to 100 kHz +1 dB / -3 dB (Line 1, Direct)
Tone Control Bass: ±10 dB (100 Hz)
Treble: ±10 dB (10 kHz)
Signal to Noise Ratio Line 1, IHF-A: 107 dB
Phono MM, IHF-A: 82 dB
Phono MC, IHF-A: 73 dB
Speaker Impedance A or B: 4 to 16 Ohms
A + B: 8 to 16 Ohms
General
Power Supply 120 VAC, 60 Hz
Power Consumption Active: 170 W
Powered, No Sound: 35 W
Standby: 0.15 W
Dimensions (W x H x D) 17.1 x 5.5 x 13.1" (435 x 139 x 331 mm)
Weight 20.3 lb (9.2 kg)

Shipment processing time

  • All orders are processed within 2-3 business days.
  • Real-time order tracking information will be sent via SMS and EMAIL once your order has been successfully processed and captured.
  • Standard/Free shipping does not include delivery on weekends or holidays.
  • Deliveries on weekend and holidays can be arranged at an extra charge to customer.

If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email or telephone. We appreciate your patience!

Shipping rates & delivery estimates

Orders below R850 does not qualify for free shipping.

Please factor in a nominal nationwide economy road 2-3 Day ETA charge of R150.

Shipment method

Estimated delivery time

Shipment cost

Economy Road

2-3 business days

Free / R850 and above

Everyday shipping as per Economy Road freight, we work with a few different courier companies and special services are available. Please request any service which’ll be the most convenient for you and Technical Sales will gladly investigate it and revert for your consideration.

* Overnight delivery is only available for orders with delivery addresses within South Africa and confirmed before 10AM the given morning.

Delivery delays can occasionally occur, your Technical Sales Rep will keep you up to date.